Arlo Camera System

It is very important to Sync Arlo Camera with both Arlo base stations and router to work properly. If you sync Arlo Camera with an Arlo base station or with a router then you need to follow the given instruction below. If you need any further help you can contact us 

Sync Arlo Camera with a base station or with a router.

Sync camera with the base station

  • Bring the camera within one to three feet of the base station.
  • Press and release the Sync button on the side of the base station. It takes some time to sync LED to blink green.
  • Press and release the Sync button on top of the camera. Cameras must be synced one at a time.
  • A blue LED on the camera blinks rapidly to confirm sync. The camera is ready for viewing.

Sync camera with a router

Check to make sure that your router is connected to the Internet. Check to make sure that your router firmware has Arlo capability.

  • Launch a web browser from a computer or wireless device that is connected to the router’s network.
  • Open the admin panel of the router using the username and password. The default username is the admin. The default password is the password of any router.
  • If an Arlo menu option displays, you’re all set. If Arlo is not one of the BASIC menu options, you must update the router’s firmware.

To update the router firmware:

  • Select ADVANCED > Administration > Router Update.
  • Click or tap the Check button. Then any new firmware is present for the router, so a message pops up on displays and asking you want to download and install it.
  • Click or tap the Yes button. The router locates and downloads the firmware and begins the update. When the upload is complete, your router restarts.

And then Sync camera

  • Take the camera close to the router within one to three feet.
  • Press and hold the WPS button on the front of the router for three to five seconds.
  • Press and release the Sync button on top of the camera. Cameras must be synced one at a time.
  • Camera blue LED blinks continuously to confirm sync. The camera is ready for viewing.
Call Now